Preis auf Anfrage
Verkäuferinformation
Verkäufer-Informationen anzeigenAllgemein
Jahr
1899
Hersteller
SCANIA
Modell
P420
Kilometerstand
89 KM
Zustand
Gebraucht
Bestandsnummer
SN74YPV
Beschreibung
Ready to Go: Scania P420B 8x4 RCV Ultra Vac c/w wash-down
Chassis Features:
Day Cab
Automatic
8x4 Double Drive
Reversing Camera
Air Con
Ultra Vac Features:
Tank:
4200 Gallons gross capacity, plus up to 1% manufacturing tolerance, straight cylindrical section tank manufactured from 4mm thick 304 stainless steel, 6mm thick ends, 5mm thick division and 2 x 4mm thick keyhole baffles.
TANK DIVISION:
Tank split 4000 gallons debris, clean water 200 gallons, division internal within main tank.
MOUNTINGS:
Tank is mounted on a sub frame as per chassis manufacturer’s recommendations and coupled to a Edbro multi stage tipping cylinder complete with safety check valve and height limiter.
REAR DOOR:
Fully hydraulic opening rear door complete with 6 x RTN Clayton Vallely PED specification door locks.
VACUUM PUMP:
Jurop LC580 water cooled vacuum pump complete with four Kelvar Vanes , piped for pressure and vacuum manual operation. (577 CFM)
DRIVE:
Driven via gearbox PTO hydraulic for vacuum pump and jetting application.
JETTING SYSTEM:
Speck NP25/50-210 jetting pump delivering 50lts per minute (11 gpm) at 210 bar, fed via a 2” water feed complete with large capacity 2” filter and isolation valve for filter cleaning. Low level water alarm also included to bring on a visual alarm when water is low and to turn off pump.
HOSEREEL 1:
Jurop 100mt 1/2” hydraulic operation stainless steel hose reel fitted to nearside rear, hose finishing in a male thread, control box for jetting controls and jetting pressure gauge fitted in close proximity. Hydraulic controls have float position and speed control fitted.
TANK INLET:
4” manual ball valve with cast iron body and stainless-steel ball fitted in rear door. Bottom loading complete with internal stack pipe which is a straight pipe with no bends and heavy-duty wear elbow to nearside at 8 o’clock position. 6 inch Outlet valve , complete 4 inch Decant valve
CONTROLS:
Control box mounted on nearside, fully protected from impact, with switches for all controls including jetting.
Weight: 32 Tonne
Motor
Leistung
313.19 kW
Antrieb
Getriebe
Automatik
Fahrgestell
Antrieb
8x4
Anzahl Hinterachsen
Zwei
Innenausstattung
Lenkung
Rechtslenker
Kategoriespezifisch
Euroklasse (Schadstoffklasse)
6
Außenseite
Kabine
Standardkabine